For Coil Tattoo Machines.

On Screen Display.Mode :Constant Voltage.

- 1-15 Volt Bar Graph .
- Oversized Voltage Figures.(Second Decimal Point.)  

 Mode:Coil Machine Diagnostics(Basic).

*Sensor Crocodile Clip must be attached on top of contact screw.
**Machine fully operationally loaded with needle ,tube and rubber loop.
***Polarity of  clipcord has to be : Tattoo machine 'case' (frame)  is  'tied' (connected) to Ground .
Bottom binding post is tied to V+.

 - Measured Frequency ( in Hz )
- Frequency Bar-Graph  with Range: 60-160 Hz
- Measured Duty Cycle ( in  % ).Duty is the time,  when coils are charging.Needle is off the skin.
- Frequency Bar-Graph  with Range: 0-100 %  
 - Measured HIGH ( Coils Charging ) & LOW( Needle moving ) times in milliseconds
(Thousands of a  second ) .

 Mode:Coil Machine Diagnostics(SinglePulsePlot).

*Sensor Crocodile Clip must be attached on top of contact screw.
**Machine fully operationally loaded with needle ,tube and rubber loop.
***Polarity of  clipcord has to be : Tattoo machine 'case' (frame)  is  'tied' (connected) to Ground .
Bottom binding post is tied to V+.

  -Real-Time Single Pulse Square Wave Plot.
- Measured Frequency ( in Hz ) & Duty Cycle ( in  % ).
- Measured HIGH ( Coils Charging ) & LOW( Needle moving ) times in microseconds
(Millionths of a second ) .