The High-End Side of Tattooing Electronics.
Coming Soon...
General Specifications :
- Output Voltage Range : 1.25 - 15.5 Volts DC ( Continuous or Pulse Width Modulated).
- Max. Output Current : 3 A.
- Core Power Supply Unit : MeanWell PS-45-15.
- EMI AC Pre-Filter : Yes, 3A max.
- Button Resettable Fuse : Yes,3A max ( Tyce Electronics W28 Series ).
- Voltage Adj. Potentiometer: Vishay-Spectrol 10 turn Precision WW Potentiometer (Tol: +/- 5% )
- Clipcord & Footswitch Case Jack Sockets: Swiss Made Auto-Lock Neutrik NJ3CFP6.
- Graphic LCD Display : Nokia , Monochrome ,84 x 48 ,lit by 4x white leds .
- MCU : 8-BIT Atmel ATmega328, @ 16 MHz.
Other Special Features :
-Pulse Width Modulated Voltage Output Mode.
For absolute speed & puncture power ( needle velocity ) control of rotary el.motor tattoo machines .
Frequency Adjustment Set Range (via Linear Potentionmeter) : Default is set to 100-20000 Hz .
Can be set on request from 1 Hz up to 1 MHz (1x 10^6 Hz ).
Duty Cycle Adjustment Set Range (via Linear Potentionmeter) : 10-100%
On-screen,real-time, graphical plot representation of (single) pulse .
-Coil Tattoo Machine Diagnostics Mode .
Attach the provided sensor croc-clip at the contact screw ,press the footswitch
and monitor in detail crucial operating variables , such as frequency & duty cycle and
stroke/charge times in microseconds-millionths of seconds-.
There is also a real-time graph plot of a single pulse.
Adjust and calibrate your tattoo machine in the most precise way possible.
100% Noiseless Sensing. Sample Rate: 100 Hz
-High quality switching,regulated and filtered output voltage.
Ensuring ' smooth 'operation of tattoo machines .
No spikes ,no harmonics,no interference,coils & motors do not heat-up ,
constant and 'strict to settings ' needle movement ,with minimised operational abnormalities.
Unit's circuits involved , are protected from magnetic-field collapse
induced ,'kickback' current of coils or motors with special circuitry.
Voltage Sensor Sampling Rate: 50 Hz*
*(Most of ordinary ,low-priced ,Voltmeters/Polymeters work at a sample rate of 4-10 Hz .)
Coming Soon...
General Specifications :
- Output Voltage Range : 1.25 - 15.5 Volts DC ( Continuous or Pulse Width Modulated).
- Max. Output Current : 3 A.
- Core Power Supply Unit : MeanWell PS-45-15.
- EMI AC Pre-Filter : Yes, 3A max.
- Button Resettable Fuse : Yes,3A max ( Tyce Electronics W28 Series ).
- Voltage Adj. Potentiometer: Vishay-Spectrol 10 turn Precision WW Potentiometer (Tol: +/- 5% )
- Clipcord & Footswitch Case Jack Sockets: Swiss Made Auto-Lock Neutrik NJ3CFP6.
- Graphic LCD Display : Nokia , Monochrome ,84 x 48 ,lit by 4x white leds .
- MCU : 8-BIT Atmel ATmega328, @ 16 MHz.
Other Special Features :
-Pulse Width Modulated Voltage Output Mode.
For absolute speed & puncture power ( needle velocity ) control of rotary el.motor tattoo machines .
Frequency Adjustment Set Range (via Linear Potentionmeter) : Default is set to 100-20000 Hz .
Can be set on request from 1 Hz up to 1 MHz (1x 10^6 Hz ).
Duty Cycle Adjustment Set Range (via Linear Potentionmeter) : 10-100%
On-screen,real-time, graphical plot representation of (single) pulse .
-Coil Tattoo Machine Diagnostics Mode .
Attach the provided sensor croc-clip at the contact screw ,press the footswitch
and monitor in detail crucial operating variables , such as frequency & duty cycle and
stroke/charge times in microseconds-millionths of seconds-.
There is also a real-time graph plot of a single pulse.
Adjust and calibrate your tattoo machine in the most precise way possible.
100% Noiseless Sensing. Sample Rate: 100 Hz
-High quality switching,regulated and filtered output voltage.
Ensuring ' smooth 'operation of tattoo machines .
No spikes ,no harmonics,no interference,coils & motors do not heat-up ,
constant and 'strict to settings ' needle movement ,with minimised operational abnormalities.
Unit's circuits involved , are protected from magnetic-field collapse
induced ,'kickback' current of coils or motors with special circuitry.
Voltage Sensor Sampling Rate: 50 Hz*
*(Most of ordinary ,low-priced ,Voltmeters/Polymeters work at a sample rate of 4-10 Hz .)
No comments:
Post a Comment