*Sensor Crocodile Clip must be attached on top of contact screw.
**Machine fully operationally loaded with needle ,tube and rubber loop.
***Polarity of clipcord has to be as follows: tattoo machine case is tied to Ground .
Bottom binding post is V+.
- Measured Frequency ( in Hz )
- Frequency Bar-Graph with Range: 60-160 Hz
- Measured Duty Cycle ( in % ).Duty is the time, when coils are charging.Needle is off the skin.
- Frequency Bar-Graph with Range: 0-100 %
- Measured HIGH ( Coils Charging ) & LOW( Needle moving ) times in milliseconds
(Thousands of a second ) .
No comments:
Post a Comment